New services, cleanup, readme

README.md

@@ -0,0 +1,76 @@
+# Home Assistant docker compose
+
+This compose sets up Home Assistant and services used by it
+
+## hass
+Home assistant container.
+
+The image is specially built with the following features
+- Home Assistant doesn't run as root
+- /config is a volume
+- /home/hass/.local/lib is a volume to make pip cache persistent between rebuilds
+- Port 8123 is exposed by default
+- Added a healthcheck
+- If the env variable WAITDB_HOST is set Home Assistant doesn't start until the mysql database at that host with username WAITDB_USER and password WAITDB_PASS is available.
+
+Available on all networks.
+Make sure to select all network adapters as active under Configuration->General->Network so `discovery` works.
+
+To update:
+
+```bash
+> docker-compose build --pull hass
+> docker-compose down hass
+> docker-compose up -d hass
+```
+
+## db
+Mariadb for Home Assistant use.
+
+## dbadmin
+PHPMyAdmin container for tweaking the database if necessary.
+Start when needed.
+
+## mqtt
+Mosquitto server.
+
+Exposed to IOT network (which is also accessible from LAN thanks to its netmask).
+
+## influx
+Storage for Home Assistant sensor data
+
+## grafana
+For pretty plotting of data from `influx`
+
+## deconz
+Deconz container
+
+`/dev/conbee` is created on the host by a udev rule in `/etc/udev/rules.d/10-conbee-local.rules`:
+```
+  ACTION="add", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", SYMLINK+="conbee"
+```
+
+VNC is activated with password `secret`. This is not exposed outside of the docker internal network, though (can be connected to with e.g. a guacamole container).
+
+A simple healthcheck is added for stability.
+
+## plejd
+plejd2mqtt container
+
+https://github.com/thomasloven/plejd2mqtt - a standalone version of a Home Assistant add-on which connects plejd via bluetooth to MQTT.
+
+Access to the bluetooth bus is required through `/var/run/dbus`.
+
+## Mobile
+pajikos/sms-gammu-gateway exposes GSM modem functionality via REST.
+
+`/dev/gsmmodem` is created on the host by a udev rule in `/etc/udev/rules.d/999-gsm-modem.rules`:
+```
+  ACTION=="add", ATTRS{idVendor}=="2001", ATTRS{idProduct}=="ac01", RUN+="/usr/sbin/usb_modeswitch -K -v 2001 -p ac01 -V 2001 -P 7e3d"
+
+SUBSYSTEM=="tty", ACTION=="add", ENV{ID_VENDOR_ID}=="2001", ENV{ID_MODEL_ID}=="7e3d", ENV{ID_USB_INTERFACE_NUM}=="01", SYMLINK+="gsmmodem"
+```
+
+This requires [usb-modeswitch](https://packages.debian.org/bullseye/usb-modeswitch) to be installed on the host, and the exact commands vary greatly from device to device. The above works for my D-Link DWM222, but may or may not work with your D-Link DWM222.
+
+Health check added for stability